wimaxd ndns error

[Paul Donohue]

On Mon, Jan 26, 2009 at 11:45:52AM -0800, Inaky Perez-Gonzalez wrote:
> On Saturday 24 January 2009, Paul Donohue wrote:
> > I'm having trouble getting wimaxd to run.
> >
> > I installed kernel 2.6.29-rc2 and the i2400m firmware, and the card is
> > detected properly, and the wmx0 interface is visible.
> >
> > I then compiled and installed the latest wimax tools, wimax network
> > service, and supplicant, but wimaxd will not start.  I edited
> > /etc/wimax/config.xml and set Severities to 255 so I could see all of the
> > debugging messages.  Here's the output in /var/log/wimax/wimaxd1.log:
> 
> The first thing that comes to mind, based on the error report you submitted
> to bugzilla, is that the supplicant library cannot be loaded. The current
> build has a hard dependency on it (which we want to remove, so at least it
> loads ok).
> 
> Are you building in 32 or 64 bit mode?
> 
> If that is the case, a q quick fix is to build and run in 32 bits. Even if
> the kernel/driver is 64 bits it will run ok.
> 
> Long term fix is for us to fix the supplicant situation. We are on it, it 
> just taking longer than expected and we are really sorry for that.
> 
Thanks for the response.  It does appear to be loading the supplicant library.  I originally built it in 64-bit mode and discovered that the supplicant library wouldn't load, so I rebuilt it in 32-bit mode, and now it loads the supplicant library, but gets stuck when loading ndns after loading the supplicant.  I haven't yet been able to figure out why it's not loading ndns.  Is there a git tree for the Network Service so I can try the latest bleeding-edge Network Service?  I'm out of other ideas at this point.

Thanks.
-Paul