Intel 5350 Firmware Download Issue

[Brandon Dell]

Hi,
  So as I last mentioned I am able to see the "wmx0" interface when I type ifconfig. Now I have run into a new issue.  I installed the Intel Binary Supplicant and Network Service.  However when I enter "/etc/init.d/wimax start" the service starts up then stops running after a few seconds.  Without this daemon running I cannot issue any wimaxcu commands.
 
Any ideas?
 
Thanks,
Brandon

--- On Wed, 11/18/09, Brandon Dell <stymiecc04 at yahoo.com> wrote:


From: Brandon Dell <stymiecc04 at yahoo.com>
Subject: Re: Intel 5350 Firmware Download Issue
To: "Jerone Young" <jerone.young at canonical.com>, "Inaky Perez-Gonzalez" <inaky at linux.intel.com>
Cc: wimax at linuxwimax.org
Date: Wednesday, November 18, 2009, 7:14 AM







Hi all,
  Yesterday I rebuilt my kernel using 2.6.29 from kernel.org and the card is being recognized now.  I am going to investigate what differences, if any, there are between 2.6.29 and 2.6.31.
 
Thanks for all you guys' help,
Brandon

--- On Tue, 11/17/09, Inaky Perez-Gonzalez <inaky at linux.intel.com> wrote:


From: Inaky Perez-Gonzalez <inaky at linux.intel.com>
Subject: Re: Intel 5350 Firmware Download Issue
To: "Jerone Young" <jerone.young at canonical.com>
Cc: "Brandon Dell" <stymiecc04 at yahoo.com>, wimax at linuxwimax.org
Date: Tuesday, November 17, 2009, 5:48 PM


On Tue, 2009-11-17 at 14:56 -0600, Jerone Young wrote:
> Are you testing with kernels 2.6.31 & greater? Apparently according to
> Kevin it works with 2.6.30 & below.

Yeap, I do. my tree is in 2.6.32-rc3





-----Inline Attachment Follows-----


_______________________________________________
wimax mailing list
wimax at linuxwimax.org
http://lists.linuxwimax.org/listinfo/wimax


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxwimax.org/pipermail/wimax/attachments/20091118/d420581b/attachment.html>